It can be frustrating to turn on the faucet in your home and barely a dribble comes out. Low water pressure can be caused by many things – some are easy to fix while others are more complex. It’s essential to know their common causes to accurately diagnose the problem and get it fixed as soon as possible through a plumbing repair in Chatsworth. Here are 10 common causes of low water pressure in your home. Hopefully, one or more of these will help you get your water pressure back up and running like normal!
1. There is a Water Supply Issue with your Supplier
You may think that your low water pressure is due to a leaking pipe, but it could be something much more straightforward. It’s possible that there might be a water supply issue with your supplier. Before you start turning valves, ask around the neighborhood. If your neighbors report similar problems, low pressure is not connected to something in the house itself, but rather it could be an issue with the main supply. You can contact your main water supplier and let them know the issue. If they are already trying to fix the problem, you’ll have to sit tight and wait.2. A Regulation Change in Your City
If the water regulations of your city have changed, then it is likely that your water supplier will need to comply with these new standards. If that’s the case, you might want to get the most out of your water pressure and install a booster system. Be sure to ask help from an expert to install this for you to prevent any malfunction or damage to your plumbing system. A high-quality plumber with years of experience installing such equipment could make sure all parts work seamlessly between themselves while ensuring proper flow throughout every pipe network around our house.3. Faulty Shut Off Valve
The shut-off valves are used to control and stop water flow in a plumbing fixture. They are usually installed in faucets, dishwashers, toilets, and refrigerators. Over time, the valves can develop rust and corrode, reducing water flow and possibly even producing a total blockage. Also, these valves can be so corroded that you cannot turn them off when there is an emergency. To avoid this, have your plumbing contractor inspect and test the valves once a year to ensure they are in good condition.4. Improperly Opened Shut-off Valves
If the shut-off valves are not fully opened, they will reduce the amount of water entering your home. But this is easy to fix; you just need to make sure that all of the shut-off valves in your home are fully open.5. Clogged Fixtures
The most common reason for low water pressure is simply caused by clogged plumbing fixtures. Sediment and rust restrict the passage of water through the pipes which reduces the flow of water. To fix this, plumbers in Chatsworth often use high-pressure water jets to remove obstructions in clogged fixtures.6. Clogged or Dirty Filters
The best way to have clean, safe water in your home is to filter it. If you notice that your filters are clogged or dirty, clean or replace them before they cause any more problems.7. Clogged Pipes
Water pressure in your house can be challenging to keep up with clogged pipes. A common cause of low water pressure is the result of small or large obstructions that inhibit water lines from functioning correctly. There are a few ways to try to fix clogged pipes yourself. One way is to pour a pot of boiling water down the drain, followed by baking soda, vinegar, and some more hot water. This will help loosen any clogs. You can also try using a plunger or a snake to clear the clog. If these methods don’t work, it’s time to call in a professional plumber.8. Corroded Pipes
Pipes come with a lifespan. They will wear out over time, and their lifespan depends on the material it is made of. Galvanized steel pipes can corrode at 20 years, copper pipes at 50 years, while brass pipes between 40-70 years. Corroded pipes can cause a decrease in water pressure as well as lead to leaks. If you have corroded pipes, the best option is usually to replace them. Plumbers in Chatsworth can help you find and replace any corroded pipes in your system, so call today if you’re experiencing low water pressure!9. Leaking Pipes
Leaks in your plumbing system can cause a drastic reduction in water pressure, as well as other serious problems. Leaking pipes are no fun. But you don’t need to worry about them anymore because we’ve got your back! Our professional plumbers have the tools to fix any leaks in your water line system, so call us for plumbing repair services or pipe leakage repair.10. Shared Pipelines
When you have a shared pipeline, it means that the water runs through more than one house. When your neighbors wash the clothes, rinse the dishes or flush the toilet, the water pressure in your house will go down, but this doesn’t mean that you are paying for their water usage, it just means that the water supply is shared. To solve this, try experimenting with your timing and routine and estimate when your neighbor is not using the water. When you figure it out, you’ll be fine with your water pressure. But if this is something that you cannot bear, then pipe replacement is the solution.Frequently Asked Questions:
What would cause low water pressure in a house?
There are several reasons you might experience low water pressure in your home. Some of the most common causes are:- 1. water supply issue with the supplier
- 2. a regulation change in your city
- 3. faulty shut off valve
- 4. improperly turned on shut off valve
- 5. clogged fixtures
- 6. clogged filters
- 7. clogged pipes
- 8. corroded pipes
- 9. leaking pipes
- 10. shared pipeline
